Scientech Technologies Pvt. Ltd.
Indore, Madhya Pradesh
Home»Our Products»

Instrumentation Engineering

We offer wide range of Instrumentation Engineering products like Control System Lab, Mini Processor Control Demonstrator, Study of Optical Transducers etc. These are the lab products.


Sensor Lab

Item Code: Scientech-2311

Features:

  • 7 capacitive touch screen LCD with inbuilt processor for viewing the output waveforms, reading the operating manual, tutorial videos etc.
  • Inbuilt DAQ
  • User can design any circuit on bread board and test
  • Stand alone TechBook
  • USB Port for Keyboard and Pendrive interface
  • Ethernet Port to connect with real world
  • On board Graph capture and store
  • Office tools are inbuilt to view PDF and doc files
  • Inverting Amplifier
  • Non Inverting Amplifier
  • Power Amplifier

Specifications:

  • Square Wave Generator: up to 40 KHz
  • Low Pass Filter: up to 30 KHz
  • High Pass Filter: after 40 KHz
  • Inver ting Amplifier: Variable Gain 1-10
  • Non Inver ting Amplifier: Variable Gain 2-10
  • Differential Amplifier: Variable Gain 1-10
  • Instr umentation Amplifier: Variable Gain 10-20
  • F/V converter: 1 KHz-1, 10 KHz-10V
  • V/F Converter: 1 V-1 KHz, 10V-10 KHz
  • A/D Converter: 4 Channel (0-5V)
  • D/A Converter: 1 Channel (0-3.3V)
  • Input/Output Ports: 4-IP / 4-0P
  • Operating Voltage Range: 0-3.3V
  • LM35: 10 mV/ °C
  • Platinum RTD: 100W at 0°C (Temp. coefficient 0.385 W /°C)
  • K Type Thermocouple: -200°C to 1250°C
  • NTC Thermistor: 4.7KW
  • BPX65 Photo Diode: 500nm – 1100 nm
  • L14G1 Photo Transistor: 500 nm – 1100 nm
  • Photovoltaic Cell: 500mV – 580 mV
  • 2 mm interconnection: 85 nos

Sockets:

  • Dimensions (mm): 326x252x52
  • Power Supply : 100V-240V AC, 50/60 Hz
  • Weight: 1.5 Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord: 1 no
  • TechBook Power Supply: 1 no
  • Patch cords: 16” (2 mm)-10 nos

Optional accessories:

  • Scientech 2311W Wireless Sensor Transceiver

Control System Lab

Item Code: Nvis-3000A

Features:

  • Open Loop Control System
  • Close Loop Control System
  • Feedback concept
  • On board Temperature Sensor and heater
  • External DC Motor with encoder
  • On board LED lamp and Light Sensor
  • On board Buzzer for Alarm
  • On board Infrared Sensor
  • On board Relay interface
  • On board LED bar display
  • On board Servo Motor control
  • DC Motor speed control
  • Light intensity control
  • V/F, F/V & V/I conversion
  • Breadboard for circuit design
  • 2 Year Warranty

 

Specifications:


  • Operating Voltage: +5V, - 5V , +12V, -12V
  • Servo Motor: +5 V DC
  • DC Motor: +12V DC
  • T emperature Sensor: 10 mV/ C
  • Light Sensor: Photo Conductive Cell (LDR)
  • Light Source: 2 LED's
  • V/F: Input 0-5V
  • Output: 0-5 KHz (Approximately)
  • F/V: Input 0-5 KHz
  • Output 0-5V (Approximately)
  • V/I: 4 to 20mA
  • Clock Generator: 0-43.50 KHz
  • SPST Relay: +5V
  • DPDT Relay: +5V
  • De-Bounce Switch: Monostable (5V output)

Control System Simulator

Item Code: Scientech-2454

Features:

  • Study of I Order System
  • Study of II Order System
  • Study of III Order System
  • Study of Type 0 System
  • Study of Type 1 System
  • Study of Type 2 System
  • Additional Resistance Bank
  • Additional Capacitance Bank
  • Additional Inductance Bank
  • Variable Voltage Output
  • Unit Step Output
  • Square Wave Output
  • Ramp Output
  • Parabolic Output
  • Buffers
  • Ess Block
  • 2 Year Warranty

Specifications:

  • Variable Voltage: -10V to +10V

Unit Step Signal:

  • Square Wave: 100 Hz
  • Ramp Wave: 100 Hz
  • Parabolic Wave: 100 Hz
  • Resistance Bank: 100R, 1K, 10K, 10K, 50K, 100K
  • Inductor Bank: 1µH, 680µH, 10mH, 10mH, 68mH, 68mH
  • Capacitor Bank: 1nF , 10nF , 10nF , 100nF , 1µF , 1µF
  • Dimensions (mm): 326x252x52
  • Power Supply: 100V-240V AC, 50/60 Hz
  • Weight: 1.5 Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Patch cord 8" (2 mm)-10 nos
  • Patch cord 12-6 nos
  • Mains cord: 1 no

DC Position Control

Item Code: Scientech-2453

Features:

  • Position control of DC motor
  • Calibrated dials for reference and output position
  • Servo Potentiometers with full 360o
  • Separate unit for motor with two side acrylic body
  • Square Wave Generator
  • Precise Signal Conditioning
  • Sensitive, Linear, Stable and Accurate
  • Easy to operate
  • 2 Year Warranty

 

Specifications:


  • Square Wave Generator: 50 Hz
  • T est Points: 4 nos (Gold plated)
  • Weight for unit 1: 1kg (approx.)
  • Dimension for unit 2 (mm): L 165X B140X H145
  • Weight for unit 2: 800 gms (approx.)
  • Dimensions (mm):  326x252x52
  • Power Supply: 100V - 240V AC, 50/60 Hz
  • Operating Conditions: 0-40 C, 85% RH
  • Included Accessories: Cabinet for Motor Assembly-1 no
  • Cable for interfacing between cabinet and laptop: 1 no

Water Level Measurement Trainer

Item Code: Scientech-2309

Over the years, we are engaged in manufacturing, supplying and exportingWater Level Measurement Trainer. At our sophisticated infrastructure unit, these products are manufactured with perfection in adherence with the international quality standards. To meet the variegated demands of customers, we offer these products in different specifications.

Features:

  • Capacitive Transducer
  • Precise Signal conditioning
  • Self-contained and easy to operate
  • Data acquisition using USB
  • Sensitive, Linear, Stable & Accurate
  • Functional blocks indicated on board mimic
  • On board Digital Voltmeter
  • On board Indicators; Buzzer & LED
  • On board On/Off Controller
  • Graphical representation
  • User friendly software
  • On Board Touch Switch
  • 2 Year Warranty

 

Specifications:

 

  • Capacitive Transducer: 0 to 2 liters
  • Level Measurement Range: 0 to 120 mm
  • F-V Specification: 5 KHz to 50 KHz input, 0 to 5 V output
  • V-I Specification: 0 to 5 VDC input, 4 to 20 mA output
  • Buzzer Indicator: 5 V DC
  • LED Indicator: 5 V DC
  • Digital Voltmeter: 0 to 10 V
  • PC Interface: USB
  • Dimensions (mm): 326x252x52
  • Power supply: 110V - 260V AC, 50/60 Hz
  • Weight: 1.5 Kg. (approximately)
  • Test Point: 18 nos (Gold Plated)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord: 1no
  • USB cable: 1no
  • Level sensor: 1 no
  • Measuring jar (2 liters): 1 no
  • TechBook Power Supply: 1 no
  • Patch cord 16" (2mm): 10 nos

Study of Temperature Transducers

Item Code: Scientech-2302

Easy to operate and maintain, the offered Study of Temperature Transducer is highly user-friendly. Owing to the quality raw materials used in its manufacture, the offered product is one of the finest that is available in the market. The highly accurate reading it provides makes it highly commendable. We make it available at standard market prices.

Features:

  • Easy to operate
  • On Board Digital Voltmeter
  • On board touch switch
  • 4 different Temperature Transducers
  • Study of Transducer controlled switching / alarm systems
  • On board signal conditioning circuitry
  • Built-in DC Power Supply
  • Functional blocks indicated on-board Mimics
  • Exhaustive Learning Material
  • 2 Year Warranty

Specifications:

  • Transducers: 4 Nos
  • Heating Element: Wirewound resistance 47 W, 10 W
  • Signal Conditioning Circuitry: Instr umentation Amplifier: X100 Amplifier
  • Interconnections: 2 mm banana sockets (Gold plated)
  • Mains Supply: 100V-240 V, AC, 50/60 Hz
  • Power Consumption: 2 VA (approximately)
  • Dimensions (mm): 326x252×52
  • Weight: 1.5 Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord: 1 nos
  • TechBook Power Supply: 1 nos
  • Patch Cord: 16” (2 mm)-8 nos
  • Patch Cord: 8” (2 mm)-7 nos

Control System Lab

Item Code: Nvis-3000

Being an ISO 9001:2008 certified manufacturer, supplier, exporter and trader, we are engaged in offering Control System Lab. Offered with different accessories like dust cover, software cd and learning material cd, these products are widely demanded in the industry. Tested for operations to ensure flawlessness, these products are dispatched at the customers end in committed time-period.

Specifications:


  • DC Motor: 12V
  • Servo Motor: 5V DC
  • Temperature Sensor: 10mV / °C
  • Light Sensor: Photo Conductive Cell (LDR)
  • Light Source: Two numbers of filament lamps
  • V/F: For 0-5V output is 0-50kHz (approximate)
  • F/V: For 0 - 50kHz output is 0 - 5V (approximate)
  • PC based Analog Inputs: 4 Inputs with 0 to 5V/ 0 to 10V
  • PC based Analog Output: 1 Output with 0 to 5V/ 0 to 10V
  • PC based Digital Inputs: 3 Inputs
  • PC based Digital Outputs: 3 Outputs
  • PC based DC Voltmeter: 0 to 10V range
  • PC based Frequency counter: 0 to 6 MHz (square wave)
  • DPM: ±12V DC
  • De-Bounced Switch: Monostable (5V output)
  • Buzzer: 5V operated
  • Switches : IR Switch, DIP selector switch
  • Clock : 0-50kHz (approximate)
  • Power Consumption : 4VA (approximate)
  • Test Points : 28 Nos, 50 Hz
  • Weight: 4 kg (approximate)

Accessories:

  • Patch Cord 8” (2 mm to 1 mm)
  • Patch Cord 12”
  • 5 Pin DIN cable
  • PC Interface Module
  • Mains Cord
  • Dust Cover
  • Software CD
  • Learning material CD


Study of Optical Transducers

Item Code: Scientech-2301

Understanding the variegated demands of customers, we have emerged in the industry as one of the eminent manufacturers, suppliers, exporters and traders of Study of Optical Transducers. Compact and user friendly in nature, these products provide learning platforms of modern, portable, comprehensive and practical way to learn technology. Used to learn photovoltaic cell, phototransistor and pin photodiode, these products are widely demanded.

Specifications:

  • Transducers: 4 Nos
  • Interconnections: 2 mm banana sockets (Gold plated)
  • Power Consumption: 2 VA (approx)
  • Dimensions (mm): 326x252x52
  • Power Supply: 100V-240V AC, 50/60 Hz
  • Weight: 1.5 Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord: 1 no
  • Tech Book Power Supply: 1no
  • Patch cords: 16"(2 mm)-8nos
  • Patch cords: 8"(2 mm)-6nos


Mini Processor Control Demonstrator

Item Code: Nvis-3002

Specifications:

  • Vessel Capacity: 2 L
  • Temperature Measurement: RTD (-99 to 850°C)
  • Heater: 230V AC
  • Temperature Range: Temperature to 100°C
  • Temperature Indicator: 0 to 850°C
  • Control Valve: Manually Operated
  • Stirrer: 0 or 5V DC
  • Level Sensor: 0 or 5V DC
  • Signal Conditioning: Amplifiers with gain of 1 and 10
  • PC Based Temp. Indicator: 0 to 100ºC
  • Power Supply: 230V ±10%, 50Hz (others on request)
  • Dimensions (mm): 280x275x460
  • Weight: 5.5 Kg


Study of LVDT Scientech

Item Code: Scientech-2303

Features:

  • Self contained and easy to operate
  • Sensitive, Linear Stable and Accurate
  • Functional block indicated on broad mimic
  • 3 digit LED display with polarity indicator
  • Onboard LVDT displacement measurement jig with micrometer
  • Amplitude measurement for Excitation Generator
  • High repeatability and reliability
  • 2 Year Warrranty

Specifications:

  • Measurement Range: 20 mm (±10 mm)
  • Excitation Frequency: 4 KHz (approximately)
  • Excitation Voltage: 4 V (approximately)PP
  • Sensitivity: 10 mV DC/ mm
  • Linear Range: Full Scale
  • Signal conditioner output: 0.1 V DC or Maximum Displacement
  • Display: 3½ Digit LED with Polarity Indicator
  • Micrometer Scale: 25 mm
  • Micrometer Least count: 0.01 mm
  • T est points: 8 nos. (Gold Plated)
  • Learning Material: CD (Theory , procedure, reference results etc),
  • Power Consumption: 2 VA (approximately)
  • Dimensions (mm): 326x252x52
  • Power Supply : 110V - 260V AC, 50/60 Hz
  • Weight: 1.5 Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord-1 nos
  • Patch cord: 16” (2 mm)-2 nos

DC/AC Potentiometric Error Detector

Item Code: Scientech-2306

Specifications:

  • DC/AC both operations
  • High quality 360 shaft rotation servo potentiometer
  • AC excitation at 800Hz approx (inbuilt Wien bridge oscillator)
  • Built in balanced demodulator circuit
  • 3.5 digits DVM for carrying measurements
  • Separate test-points to observe waveforms after each block
  • Phase reversal of error in AC operation
  • Closed loop position control system
  • Self contained and easy to operate

 

Specifications:

 

  • No. of Potentiometer: 2 nos
  • T ype of Potentiometer: 3600 Shaft rotation 10k Servo Potentiometer
  • No. of DC geared motor: 1 no
  • Motor Specification: DC 12 volt operated, 30 RPM
  • No. of gear set for shaft coupling: 1 no
  • Gear ratio: 1:1
  • Inbuilt Carrier Frequency: 800 (approx)
  • Potentiometer Excitation: +12 volts
  • Digital panel meter (DVM): +20 & -20 volts display range
  • Power Supply: 110-220 V , 50 / 60 Hz
  • Dimensions (mm) : 302×232×525
  • Weight: 1.8 Kg (approximately)

Pressure Transducer Explorer

Item Code: Scientech-2308

Features:

  • Differential Input Pressure Transducer
  • Precise Signal conditioning
  • Self-contained and easy to operate
  • Data acquisition using USB
  • Sensitive, Linear, Stable & Accurate
  • Functional blocks indicated on board mimic
  • On board Digital Voltmeter
  • On board Indicators; Buzzer & LED
  • On board On/Off Controller
  • Graphical representation
  • User friendly software
  • 2 Year Warranty

Specifications:

  • Pressure T ransducer: 0 to 100 psi, Differential input
  • Pressure Gauge: 0 to 100 psi
  • Pressure Vessel: 0 to 100 psi
  • Safety Valve: 0 to 100 psi
  • Hoses: 1.5 m
  • Foot Pump: 0 to 150 psi
  • V-I Specification: 0 to 5 VDC input, 4 to 20 mA output
  • Buzzer Indicator: 5 V DC
  • LED Indicator: 5 V DC
  • Digital Voltmeter: 0 to 10 V
  • Dimensions (mm): 326x252x52
  • Power Supply: 100V - 240V AC, 50/60Hz
  • Weight: 1.5 Kg (approximately)
  • Test Points: 18 nos (Gold Plated)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • PU-Tube: 1 meter
  • Foot Pump: 1 no, USB cable-1 no
  • Pressure Vessel: 1 no
  • Mains cord: 1 no
  • T echBook Power Supply: 1 no
  • Patch cord: 16”(2mm) - 10 nos

Ultrasonic Transducer Trainer

Item Code: Scientech-2312

Ultrasonic Transducer Trainer

Features:


  • Ultrasonic Transducer as a distance meter
  • Ultrasonic Transducer as a proximity switch study
  • Long distances can be measured
  • Buzzer indicator
  • Self-contained and easy to operate
  • Signal conditioning, instrumentation circuitry
  • Exhaustive course material & references
  • On Board Touch Switch
  • 2 Year Warranty

 

Specifications:

 

  • Ultrasonic Transducer: 27 cm to 1.5 meter (approximately)
  • Clock Generator: 40 KHz
  • Amplifier: 60 db
  • Display: Seven segment
  • Threshold detector: 0 to 9 V DC
  • Buzzer Indicator: 5 V DC
  • Dimensions (mm): 326x252x52
  • Power Supply: 100V - 240V AC, 50/60Hz
  • Weight: 1.5 Kg (approximately)
  • Test Point: 15 nos (Gold plated)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord: 1 no
  • Patch cord: 16”(2mm)-8 nos
  • TechBook Power Supply: 1 no

Overview of PID Controller

Item Code: Scientech-2451

Features:

  • Proportional, Integral and Derivative functions can be checked on same board ( configurable as P,I,D, PI, PD,PID ) ON/OFF controller
  • Square and triangular wave with variable frequency for testing PID
  • Variable DC for set point
  • Error detector
  • Ist order system & IInd order system
  • In built power supply
  • Dead zone and disturbances generator
  • Built-in 3 DVM for DC measurement with three range selection
  • Test point at varies block to measure and observe the signals
  • Easy to operate and understand
  • Manual describing working of trainer along with detailed experiment descriptions

Specifications:

  • Proportional Band: 5% to 55%
  • Integrator: 1 msec to 11 msec
  • ON/OFF controller: ON = 12 V , OFF = -12 V
  • Square Wave & Triangular Wave Generator: 0-156 Hz, T wo Variable DC Supply +6V ,+10V
  • Interconnections: 2 mm socket
  • T est Points: 5 nos (Gold plated)
  • Dimensions (mm): W 326 x D 252 x H 52
  • Power Supply: 100V - 240V AC, 50/60Hz
  • Weight: 1.5Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Patch cord: 8”(2 mm)-14 nos
  • Patch cord: 12” (2 mm)-6 Nos, Mains cord-1 no
  • TehBook Power Supply: 1 no

Lead Lag Compensation Network

Item Code: Scientech-2452

Features:

  • Digital Frequency Counter
  • Square Wave Generator
  • Precise Signal Conditioning
  • Sensitive, linear, stable and accurate
  • Easy to operate
  • Rugged and compact
  • Functional Blocks indicated on board mimic
  • 2 mm socket for interconnection
  • Test points at various blocks to measure and observe the signals
  • eManual describing working of TechBook along with detailed experiment descriptions
  • On Board Touch Switch
  • 2 Year Warranty

Specifications:

  • Frequency Counter: 0 Hz-50 KHz
  • Square Wave Generator: 0 Hz-2 KHz
  • Interconnection sockets: 16 (2 mm)
  • Power Consumption: 1.6 VA (Approximately)
  • T est Points: 17 nos (Gold plated)
  • Dimensions (mm): 326x252x52
  • Power Supply: 110V - 260V AC, 50/60Hz
  • Weight: 1.5Kg (Approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Patch cords: 16” (2 mm)-5 nos
  • Mains cord: 1 no
  • TechBook Power Supply: 1 no


Synchro Transmitter and Receiver

Item Code: Scientech-2455

Features:

  • Calibrated dials for reference and output position
  • Switch for transmitter and Receiver rotor supply
  • Synchro Transmitter and Receiver rotor terminals onboard
  • Synchro Transmitter and Receiver stator terminals onboard
  • AC Voltmeter to measure stator and rotor voltages
  • On/Off Touch Switch
  • Sensitive, linear, stable and accurate
  • Easy to operate
  • 2 Year Warranty

Specifications:

  • Transformer Rating: 100V AC, 1 amp (Rotor winding Supply)
  • Digital Voltmeter: 0-400 V AC max
  • Power Supply: 230V ± 10%, 50Hz/60 Hz
  • Dimension: 430x260x100
  • Weight: 4.5 kgs (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Patch cord 14" (4mm)-10 nos
  • Mains cord: 1 no

Analog Module for PLC

Item Code: Scientech-2403AM

Features:

  • Analog module of PLC from FATEK
  • I/O terminals for connection of external analog signals
  • On board variable DC supply
  • On board light intensity control application
  • Most user friendly, most powerful instruction sets
  • PC Based Programming
  • Soft copy of analog PLC introduction and tutorials
  • Ready to perform experiments (optional)
  • Learning Material
  • Ready to use Application boards
  • 2 Year Warranty

Specifications:

Analog Input:

  • Total Channels: 4 CH
  • Resolution: 14 or 12 bit
  • Signal Resolution: 0.3mV (Voltage), 0.61uA (Current)
  • I/O Points Occupied: 4 RI (Input Register)
  • Conversion Time: Updated each scan
  • Accuracy: ±1 %
  • Max. Absolute: ±15V (Voltage), 30mA (Current) Input Rating
  • Software Filter: Moving average
  • Average Samples: 1~16 configurable
  • Input Impedance: 63.2 KW (Voltage), 250? (Current)

Measurement Range:

  • Voltage: +10V, +5V, 0~10V , 0~5V ,
  • Current: +20mA, +10mA, 0~20mA, 0~10mA

Analog Output:

  • Total Channels: 2 CH
  • Resolution: 14 bit
  • Signal Resolution: 0.3mV (Voltage), 0.61uA (Current)
  • I/O Points Occupied: 2 RO (Output Register)
  • Conversion Time: Updated each scan
  • Accuracy: ±1 %

Max. and Min. Output:

  • Voltage output: 500~1MW
  • Loading current output: 0~500 W
  • Output range roltage : +10V, +5V, 0~10V , 0~5V ,
  • Current: +20mA, +10mA, 0~20mA, 0~10mA
  • Test Points: 11 nos ( Gold Plated)
  • Mains Supply: 100-240V AC 50/60 Hz
  • Dimensions (mm): 420x255×100
  • Weight: 1 Kg (approx.)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • 14 Pin FRC cable: 1 no
  • 20 Pin FRC cable: 2 nos
  • Patch cords: 16” (2mm)-8nos
  • Mains cord: 1 no

Study of Industrial PLC

Item Code: Scientech-2404A

Features:

  • MicroLogix PLC from Allen-Bradley
  • Ten digital inputs with two DC common
  • Six digital outputs with two Relay based and four transistor based outputs
  • Industry relevant training material
  • On board NO/NC switches
  • On board IR switches
  • Sample of Annunciator given on board
  • User friendly, and powerful instruction sets
  • PC based programming
  • Soft copy of PLC introduction and tutorials
  • 2 Year Warranty

Specifications:

  • Allen-Bradley CPU Type: MicroLogix 1000
  • Digital Input: 10 inputs (24V dc sink/source)
  • Digital output: 6 (4 source 24V dc outputs, 2
  • contact outputs)
  • Toggle Switches: 3
  • Latch Switches: 3
  • IR Switches: 2
  • LED Display: 7
  • Fast Execution time: 500-instruction program in only 1.56 ms
  • Memory Size : 1K words (approximately 737 instr uction words, 437 data-table words)
  • Timers/Counters Max: 40 timers, 32 counters (fixed)
  • Program Scan Time/K word: 2 ms Typical
  • I/O Scan Time, T ypical: 0.21 ms
  • Interfacing: RS232
  • No. of ports: 1
  • Input voltage: 24VDC
  • Output voltage: 5VDC
  • Dimensions (mm): 326x252x52
  • Power Supply: 100V-240V AC, 50/60Hz
  • Weight: 1.5Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord: 1 no
  • Patch Cords: 8” (2 mm)-6 nos
  • Patch Cords: 16” (2 mm)-8 nos



Industrial Operator Control Station

Item Code: Scientech-2405

Features:

  • Graphics display for better process
  • Full numeric keypad with function key
  • 128X64 LCD screen
  • 12 digital inputs
  • 6 digital outputs relay based
  • 4 Analog input
  • On board NO/NC Switches, Latch switches
  • Sample of Annunciator given on board
  • Powerful instruction set
  • PC based programming
  • Ready experiments
  • Exhaustive course material & References
  • Extremely easy and user friendly software to develop different programs
  • On Board Touch Switch
  • 2 Year Warranty

Specifications:

  • Digital Input: 12
  • Digital Output: 6
  • Analog Input: 4
  • Ladder logic size: 256 KB
  • T oggle switches: 3
  • Latch switches: 3
  • LED Display: 6
  • Boolean Execution speed: 1.2 ms/k
  • Register memory: 32 KB
  • Interfacing: RS232
  • Digital Input voltage: +24V DC
  • Digital Output voltage: +5V DC
  • 2 Variable Supply: 0 to 5V DC
  • T est Points: 9 nos (Gold plated)
  • Mains Supply: 100- 240V , 50/60HZ
  • Power Consumption: 5VA (approximately)
  • Learning Material: CD (Theory , procedure, reference, results, etc), Online (optional)
  • Dimension: 326×252×52
  • Weight: 1.2 Kg

Included Accessories:

  • General Purpose Simulation PCB
  • Patch chord: 8”(2mm)-6 nos

Industrial Trainers

Item Code: Scientech-ITS-PLC

Features:

  • 3D realistic graphics
  • Real-time physics that closely emulates what happens in real life
  • 3D real-time sound
  • Total interactivity with the systems
  • Friendly user interface
  • Easy and fast to setup

Water Level Control by PLC

Item Code: Scientech-2421

Features:

  • User friendly and powerful instruction sets
  • Ready to use application board
  • Exhaustive learning material
  • 2 Year Warranty

 

Specifications:


  • Interface: 20 pin FRC cable with PLC (Scientech 2401
  • Input pin voltage: 24 V DC when par ticular i/p is activated from PLC
  • Output pin voltage: 5 V DC when par ticular o/p is activated from PLC
  • Power supply: From PLC of 2401 or 2403
  • Dimensions (mm): 255x155x80
  • Weight: 300 gm (approximately)
  • Learning Material: CD (Theory , procedure, reference result, Online (optional)
  • Operating Conditions: 0-40 C, 85% RH

Elevator Control by PLC

Item Code: Scientech-2422

Features:

  • User friendly and powerful instruction sets.
  • Ready to use application board.
  • Exhaustive learning material
  • 2 Year Warranty

Specifications:

  • Interface: 20 pin FRC cable with PLC (Scientech 2401 A / B / C or 2403 A/B)
  • Input pin voltage: 24 V DC when par ticular i/p is activated from PLC
  • Output pin voltage: 5 V DC when par ticular o/p is activated from PLC
  • Dimension (mm) : 255x155x80
  • Weight: 320 gm (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • 20 Pin FRC cable-1 no, CD-1no

Traffic Light Control by PLC

Item Code: Scientech-2423A

Features:

  • User friendly and powerful instruction sets
  • Ready to use application board
  • Exhaustive learning material
  • 2 Year Warranty

 

Specifications:


  • Interface: 20 pin FRC cable with PLC (Scientech 2401 A/B/C or 2403 A/B)
  • Input pin voltage: 24 V DC when par ticular i/p is activated from PLC
  • Output pin voltage: 5 V DC when par ticular o/p is activated from PLC
  • Power supply: From PLC
  • Dimension (mm): 255×155×80
  • Weight: 300 gm (approximately)
  • Operating conditions: 0-40 C, 85% RH

Included accessories:

  • 20 Pin FRC cable-1no

Temperature Control by PLC

Item Code: Scientech-2424

Features:

  • User friendly and powerful instruction sets
  • Temperature variations in voltage shown on LCD
  • Ready to use application board
  • Exhaustive learning material
  • 2 Year Warranty

Specifications:

Voltage (unipolar):

  • 0 to 10 V , 0 to 5 V
  • 0 to 1 V , 0 to 500 mV
  • 0 to 100 mV , 0 to 50 mV

Voltage (bipolar):

  • Voltages: +10 V, +5 V, +2.5 V, +1 V, +500
  • mV, +250 mV, +100 mV, +50 mV, +25 mV
  • Current: 0 to 20 mA

Analog output range:

  • Voltage output: +10 V
  • Current output: 0 to 20 mA
  • Digital Output pin voltage: 5 V DC when par ticular o/p is activated from PLC
  • Output of Sensor 1: 0-2 V max 0 to 200°C
  • Output of Sensor 2: 4-20 mA max for 0 to 100°C
  • Heater: 7 Watt resister
  • Power Supply: PLC 2424 and DC 9 V-500
  • Dimension (mm): 255×155×80
  • Weight: 350 gm (approximately)
  • Interface: 20 & 10 pin FRC cable along with Scientech 2401A/B/C, 20 & 14 FRC
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • 9 V DC Adapter: 1 no
  • Patch cords: 16” (2 mm)-8 nos


Conveyor Control by PLC

Item Code: Scientech-2425

Features:

  • User friendly and powerful instruction sets.
  • Ready to use application board.
  • Exhaustive learning material
  • On board buzzer, Proximity Sensor, IR Sensor, DC motor
  • On board conveyor
  • 2 Year Warranty

Specifications:

  • Digital Input pin voltage: 24VDC when par ticular i/p is activated from PLC
  • Digital Output pin voltage: 5VDC when par ticular o/p is activated from PLC
  • Interface : PLC (Scientech 2401or 03).
  • Buzzer: +5V DC
  • Proximity Sensor: +24V DC output
  • IR Sensor: +24V DC output
  • DC Motor: +5VDC
  • Mains Supply: +5V & +24V
  • Dimension (mm): W 300 × D 40 × H 120
  • Weight: 1.25 Kg (approximately)
  • Learning Material: CD (Theory , procedure, reference results etc), Online (optional)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Patch cord: 16” (2 mm)-6 nos
  • Patch cord: 8” (2 mm)-4 nos
  • Metallic containers: 5 nos
  • Non metallic containers: 5 nos

Speed Control of DC Motor by PLC

Item Code: Scientech-2426

Features:

  • User friendly and powerful instruction sets
  • Ready to use application board
  • Exhaustive learning material
  • 2 Year Warranty

Specifications:

Analog Input ranges:

  • Voltage (unipolar): 0 to 10 V, 0 to 5 V, 0 to 1 V , 0 to 500 mV, 0 to 100 mV, 0 to 50 mV
  • Voltage (bipolar): +10 V, +5V, +2.5 V, +1 V, +500 mV, +250 mV, +100 mV, +50 mV, +25 mV
  • Analog output range: Voltage output +10 V
  • Digital output pin voltage: 5 VDC when par ticular o/p is activated from PLC
  • Output of F/V converter: 0-5Vmax 0 to 2400 RPM
  • Mains Supply: 100-240V AC, 50/60 Hz
  • Dimension (mm): W 255 × D 155 × H 80
  • Weight: 420 gms (approx.)
  • Test Points: 9 nos (Gold plated)
  • Interface: 20 pin FRC cable (Scientech 2401 or 2403 B)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Patch cords: 16”(2 mm)-5nos
  • Mains cords: 1 no

Motor & Switches Control by PLC

Item Code: Scientech-2427

Features:

  • User friendly and powerful instruction sets
  • Ready to use application board
  • On board Stepper motor, thumbwheel switch and limit switch
  • Exhaustive learning material
  • 2 Year Warranty

 

Specifications:


  • Interface: 20 pin FRC cable with PLC (Scientech 2401 or 2403)
  • Digital input pin voltage: 24V DC
  • Digital output pin voltage: 5V DC
  • Stepper motor: 5V DC
  • Thumbwheel switch: + 24V DC
  • T est Points: 3 nos (Gold plated)
  • Limit switch: + 24V DC
  • Weight: 420 gms (approximately)
  • Weight: 300x120xB40
  • Operating Conditions : 0-40 C, 85% RH

Included Accessories:

  • 20 Pin FRC cable-1 no

 

Flow Rate Measurement

Item Code: Nvis-3003

Features:

  • User friendly, self explanatory system.
  • Leak proof safety measures, study piping.
  • Enhanced electrical safety consideration.
  • Training manual for operation ease.
  • M.S. right angle platform with standard instrument mounting.
  • 2 Year Warranty.

 

Specifications:


  • Pump : 1/2 HP , 230 V AC
  • Rotameter : Range:0 to 2000 LPH
  • T ype:Glass tube type / Acrylic body
  • Connection:Ver tically placed back body
  • Mounting:Inlet - bottom, Outlet - top
  • Piping : 20mm (3/4”) CPVC
  • 20mm (3/4”) Flexible
  • Water T ap : Inlet, Outlet - 20mm (3/4")
  • Power Supply : 230V , 50Hz
  • Dimensions : W609 X D330 X H533
  • Weight : 10Kg (approximately)

 

Study of Proximity Sensors

Item Code: Scientech-2313

Features:

  • Inductive Proximity Sensor
  • Capacitive Proximity Sensor
  • Magnetic Sensor
  • Optical Sensor
  • Audio and LED indicator for the object detection
  • Easy to operate and carry
  • Exhaustive Learning material
  • 2 Year Warranty

Specifications:

  • Optical Sensor: T ransmitter, IR LED
  • Wavelength: 940 nm
  • IR Receiver: Phototransistor
  • Wavelength: 940 nm
  • Operating input voltage: 5V DC
  • Output signal: TTL
  • Sensing range: 0-10 mm
  • Magnetic Sensor: Operating input voltage: 5V DC
  • Output voltage: 5V DC
  • Sensing range: 0-20 mm
  • Inductive Proximity Sensor: Operating input voltage, 12V DC
  • Output voltage: 12V DC
  • Sensing range: 0-10 mm
  • Capacitive Proximity Sensor: Operating input voltage, 12V DC
  • Output voltage: 12V DC
  • Sensing range: 0-10 mm
  • Test Points: 8 Gold plated
  • Dimensions (mm): 326x252x52
  • Power Supply: 110V-260V ±10%, 50/60 Hz
  • Weight: 1.5 Kg. (approximately)
  • Operating Conditions: 0-40 C, 80% RH
  • Learning Material: Online (Theory , procedure, reference results, etc)

Study of Stepper Motor

Item Code: Scientech-2458

Features:

  • Different modes of operation
  • Half and Full step angle
  • Visual indication of the coil excitation
  • External connector for programming with different controllers
  • Separate unit for Motor in a see through cabinet
  • Easy to operate
  • Exhaustive Learning Material
  • 2 Year Warranty

Specifications:

Stepper Motor:

  • Motor T ype: Unipolar
  • T orque: 6 Kg-cm
  • Phase Current: 0.8 Amp
  • Stepping Angle: 1.8 /0.9
  • Operating Voltage: 12 V DC
  • Input Pulse: 5V TTL Compatible
  • Test Points: 20 Gold plated

Cabinet for Motor:

  • Dimension: 165x140x145
  • Weight: 500 gms (approximately)
  • Power Supply: 110 / 230V ± 10%, 50/60 Hz
  • Dimension (mm): 326x252x52
  • Operating Conditions: 0-40 C, 80% RH
  • Weight: 1.5 Kgs. (approximately) including Motor

DC Motor Speed Control

Item Code: Scientech-2457

Features:

  • Closed loop motor speed control with eddy current brake
  • System contains PID Controller for controlling the speed of DC Motor
  • Slotted disk for speed measurement
  • Separate unit for Motor in a see through cabinet
  • LCD for speed and voltage display
  • Square wave generator
  • Precise signal conditioning
  • Sensitive, linear, stable and accurate
  • User friendly software
  • Easy to operate
  • 2 Year warranty

Specifications:

  • DC Motor: 12V DC
  • Speed range: 2400 RPM
  • Speed sensing: IR Sensor
  • Digital Voltmeter: ±10V
  • Electronic Tacho Generator: 0-2400 RPM
  • Square wave generator: 500 Hz
  • Test Points: 6 nos. Gold plated
  • Power Supply: 110 / 230V ± 10%, 50/60Hz
  • Dimension (mm): 326x252x52
  • Operating Conditions : 0-40 C, 80% RH
  • Weight : 1.5 Kgs. (approximately)

Motor Cabinet:

  • Dimension: 230x130x130
  • Weight : 1.6 Kg (approximately)

Included Accessories:

  • TechBook Power Supply: 1 nos
  • Path cord: 8"-2 nos
  • Mains cord; 1 nos
  • Cabinet for Motor assembly; 1 nos
  • Connecting cable: 1 nos

Potentiometric Displacement Sensor

Item Code: Scientech-2314

Features:

  • Self-contained and easy to operate
  • Sensitive, Linear, Stable & Accurate
  • Built in DC Power Supplies
  • Micrometer for displacement measurement
  • Calibrated dials for output position
  • Servo Potentiometers with full 360
  • Online Product Tutorials
  • 2 Year Warranty

Specifications:

  • Sensor Type: Potentiometric
  • Linear displacement: 0 to 15 mm

Measurement Range:

  • Micrometer Scale: 25 mm
  • Micrometer Least count: 0.01 mm
  • Angular displacement: 0 to 360
  • Input: 5 V DC
  • Linear output: 0-3V DC
  • Angular output: 0-5V DC
  • Test Points: 6 nos.
  • Mains Supply: 110-260 V AC; 50/60 Hz
  • Dimensions (mm): 255×155×80
  • Operating Conditions: 0-40 C, 85% RH
  • Weight: 1 Kg (approximately)

Included Accessories:

  • Mains cord: 1 no

Universal PLC Platform

Item Code: Scientech-2400

Features:

  • Freedom to select PLC of different makes
  • Open platform to explore wide PLC applications
  • Industrial feel & look
  • NO/NC Toggle Switches, Push to ON Switch, IR Sensor , LED`s , Buzzer
  • Din rail mounting for PLC
  • Powerful instruction sets
  • PC based Ladder programming
  • High execution speed
  • Extremely easy and student friendly software to develop different programs
  • Several sample Ladder programs
  • Choice of PLC and expansion modules
  • Easy downloading of programs
  • Practice Troubleshooting Skills
  • Compact tabletop ergonomic design
  • Ready Experimental details
  • Robust Construction
  • Online Product Tutorials
  • 2 Year Warranty

 

Specifications:


  • T oggle Switch : 8 nos
  • Push to ON Switch : 3 nos
  • IR Sensor : 1 no
  • LED : 8 nos
  • Buzzer : 1 no
  • Operating T emperature : 0-40°C, 80 % RH
  • Dimension (mm) : W600 x H 250 x D 300
  • Weight : 6 Kg (approximately)
  • Product T utorials  : Online (Theory , procedure,
  • reference results etc)
  • Included Accessories : Inter facing cable: 1 No.
  • Mains cord: 1 No.

 

PLC Controlled Electro Pneumatic Training Platform

Item Code: Nvis-3021

Features:

  • PLC operated Electro Pneumatic platform
  • 12 Digital Input, 8 Digital Output
  • Open platform to explore wide PLC and Pneumatic applications
  • Industrial feel & look
  • DIN rail mounting for PLC
  • Function and identification of Pneumatic components and their symbols
  • Powerful instruction sets
  • High execution speed
  • Extremely easy and student friendly software
  • Several sample Ladder programs
  • Practice troubleshooting skills
  • Compact tabletop ergonomic design
  • Ready experimental details
  • Robust construction
  • Toggle Switches, LED`s, Buzzer, Double acting cylinder, 5/2 solenoid valve, Flow control valve, Manifold,5/2 hand lever valve.
  • Mounting panel for Pneumatic Components
  • Sequential & Linear Pneumatic Control
  • Understanding of Industrial Pneumatic Components
  • Pneumatic Safety awareness
  • Exhaustive course material & references
  • `One Touch Push in Fittings` for easy fitting of PU tubes - which are provided for fast & leak-proof connections
  • Online Product Tutorials
  • 2 Year Warranty

 

Relay Control by PC

Item Code: Scientech-2305

Features:

  • Controlling of eight relays (DC 5V) with LED indication
  • Relay control and simulation facility using software
  • Controlling relay sequences using software
  • On Board touch switch
  • Self contained and easy to operate
  • 2 Year Warranty

Specifications:

  • Eight identical switched relays: (DC 5V) HFD27/005-S SPDT 1A
  • Power input positions to the relays using 3 pole terminal blocks: 4
  • DB25 connector to the parallel port of a PC: 4
  • Protection of parallel port on PC in case of accidental disconnection: 4
  • Diode protection for transistors: 4
  • Power Consumption: 2VA (approximately)
  • Dimensions (mm): 326x 252x52
  • Power Supply : 100V - 240V AC, 50/60 Hz
  • Weight: 1.5 Kg (approximately)
  • Operating Conditions: 0-40 C, 85% RH

Included Accessories:

  • Mains cord: 1 nos
  • T echBook Power Supply: 1no
  • Patch Cord 16” (2 mm): 12nos
  • Patch Cord 8” (2 mm): 12nos
  • DB25 cable(parallel): 1no

 

Scientech Technologies Pvt. Ltd.

Mr. Ambrish Kela (Managing Director & CEO)
94, Electronic Complex, Pardesipura
Indore - 452010
Madhya Pradesh, India
© Scientech Technologies Pvt. Ltd.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited